Buy today with nothing to pay for 3 months & a fantastic low rate of 4.49% APR Representative
Minimum order £2000. No deposit required. Credit is subject to application and status. Finance example.
0% Interest Free
Credit now available
over 3 years!
50% deposit required. Minimum order £2000. Credit is subject to application and status.
Alutech Replacement Garage Doors
Warm, reliable and safe replacement garage doors ensure comfort and convenience every day. Wide choice of designs and colours for Alutech Doors will help to emphasize individual style of modern architecture in hi-tech style or in a classic cottage. ALUTECH Doors can be installed in any garage. Alutech doors are all made to measure so will suit any style or shape of opening.
- FLUSH MOUNTING FRAME LEGS
ALUTECH replacement garage doors are good at keeping heat in. Thus providing a comfortable temperature and saving on heating costs in the winter. The thermal transmittance coefficient for ALUTECH doors is: TrendSeries(panel40mm) — 1.35 W/(m2К)* Thermal insulation U = 1.35 W/(m2К) is comparable with a brick wall of 55 cm thickness. Alutech sectional doors are supplied all over Europe, including some of the coldest regions possible.
- DURABILITY AND RELIABLE PROTECTION
Panels with such a thickness are the basis of the doors’ durability, robust construction and resistance to wind and impact loads. The tests have showed that the ALUTECH Trend Series doors withstand a wind load of 700 Pa, that corresponds to wind speed of 120 km/h. 40mm thick sandwich panels, provide the foundation for durability, robust construction, and resistance to impact and wind loads.
- LONG OPERATIONAL LIFE – ALUTECH
Sandwich panels have a closed loop design where steel sheets are interfixed into a «lock». This type of design prevents panels delaminating in the sun, or if the door meets a sudden obstruction. It therefore maximises the life span of the door, maintaining its smooth operation
- RESISTANCE TO CORROSION
Tests in independent laboratories “Rosenheim Institute, Germany” proved that the Alutech door leaf can withstand the harshest environments, including the equivalent of 15 years of operation in coastal areas and heavily polluted industrial regions. These unique anti-corrosion properties are possible due to; thickness of zinc coating (16 micron); double layer paint-and-lacquer
- RELIABLE SEALING
Alutech sectional door seals are manufactured by EDPM, a soft sealing rubber compound. The side and top seal have two leaves, forming an additional air chamber that substantially reduces heat-loss. The roller door brackets are designed to allow fine adjustment, between the door panel and garage structure, helps to eliminate gaps and any resulting heat loss. The doors roller brackets also feature ball-race bearings for smooth, quiet operation and a longer lifespan.
Design of Alutech sectional doors provides protection against; Finger trapping; Spring breakage. Conformance to European standards EN 12604, EN 12453, EN 12424, EN 12425, EN 12426
- MAXIMUM SPRING ENDURANCE
Lifetime of ALUTECH/GUNTHER springs on Alutech sectional doors is up to 25,000 open/close cycles which corresponds to approximately 17 years of operation with 4 open/close cycles per day. Springs capable of 25,000 open/close cycles are offered as standard at no extra charge.
- WIDE POSSIBILITIES
Alutech doors are made to measure to suit a clients individual requirement. Increments of 5mm in both the width and height are available (at extra cost). A wide choice of panels and colours are available to suit any style. Alutech offer 5 panel types and 17 different standard colours. For the individual look, Alutech offer a bespoke painting service to any RAL colour.
- EFFICIENT, QUALITY, SERVICE AND MAINTENANCE
To compliment the quality product Alutech offer fast efficient and reliable service and maintenance support.
Motorised garage door packages starting at just £995 installed!
(9am - 9pm 7 days a week)
Free Design Service
10 Year Guarantee
Price Match Policy